The studio
Packaging design without the waiting
Everything a packaging designer would check, built into an editor anyone can use.
01 · The studio
See exactly what you'll get
The 2D editor and the 3D box update together, and the studio warns you about print problems while you work.
Live 2D and 3D
Drag a photo on the dieline and see it move on the folded box at the same moment.
Print checks before the printer
Low-resolution photos, artwork past the bleed and text on a fold are flagged while you design.
Inside and outside
Print the inside of the box too, from the same editor, with the sheet mirrored for you.
Real materials
Preview your design on white board, kraft or corrugated before you choose.
Layered print SVG
Cut, crease, background, graphics and text on separate layers, with text kept as real text.
Text that stays text
Your words are never turned into pixels, so they print sharp at any size.
The studio catches it first
These are the same warnings you see in the editor.
- Prints at 140 DPI at this size and may look blurry. Make it smaller or use a sharper image (300 DPI or more).
- Part of this is outside the print area and will be cut off.
- Text crosses a fold or is within 3 mm of an edge. Keep it inside one panel so it isn't cut or bent.
02 · How it works
From flat sheet to finished box in four steps
Everything happens in the browser, on the real cutting template.
- 01
Pick a dieline
Choose a box style from the template library. Every template is a real, millimetre-accurate cutting die.
- 02
Design on the flat sheet
Add text and photos on the panels, inside and outside. Colours run into the bleed for you.
- 03
Check it in 3D
Watch the sheet fold into the box and spin it around. Fix anything that sits in the wrong place.
- 04
Export print-ready
Download a layered SVG with cut and crease lines untouched, plus a 3D mockup image.