This flip top boxes with window dieline is 200.6 × 100.6 × 40.6 mm (length × width × height). Put your text, logo and photos on the flat sheet, watch the box fold up in 3D as you work, and download a file your printer can cut from.
Also called: Flip top boxes, With window, Card locks, Tuck front box, Boxes with Window.
Free to start. The studio opens with this dieline; sign in first if you haven't.
Template details
Size (L × W × H)
200.6 × 100.6 × 40.6 mm · 7.9 × 4 × 1.6 in
Category
Food
Print sides
Outside and inside, each designed separately
Print file
Layered SVG with the cut, crease and bleed lines on their own layers
Custom size
Type your own length, width and height
How to design it
01
Open the dieline
The studio loads it at the size above. Change the length, width or height if your product needs a different fit.
02
Add your artwork
Drop photos, logos and text onto the panels, fill panels with colour, or describe your product and let Printly AI draft a design you can edit.
03
Check it in 3D
The box folds up next to the editor, so you can see which panel is the front, what lands on the lid and how artwork wraps round each fold.
04
Download the print file
You get a ZIP with an SVG for the outside and one for the inside, your original images and a README for the printer.
Before you send it to print
Run background colours and photos out to the bleed line (grey, dashed), not only to the cut line, so no white edge shows after cutting.
Keep text and logos a few millimetres inside the cut and away from the red crease lines. The studio warns you when something sits too close.
Questions about this template
What size is the flip top boxes with window?
200.6 × 100.6 × 40.6 mm, measured as length × width × height. That is 7.9 × 4 × 1.6 in.
Can I change the size?
Yes. Type a new length, width or height in the studio and the dieline is redrawn for it. Glue tabs and flap depths keep their size, and the print file notes that the size was changed from the template's.
What file do I get?
A ZIP with one SVG for the outside of the sheet and one for the inside. Your artwork and text sit on separate layers with the cut, crease and bleed lines on top, and the original images come in an assets folder.
This flip top boxes with window dieline is 200.6 × 100.6 × 40.6 mm (length × width × height). Put your text, logo and photos on the flat sheet, watch the box fold up in 3D as you work, and download a file your printer can cut from.
Also called: Flip top boxes, With window, Card locks, Tuck front box, Boxes with Window.
Free to start. The studio opens with this dieline; sign in first if you haven't.
Template details
Size (L × W × H)
200.6 × 100.6 × 40.6 mm · 7.9 × 4 × 1.6 in
Category
Food
Print sides
Outside and inside, each designed separately
Print file
Layered SVG with the cut, crease and bleed lines on their own layers
Custom size
Type your own length, width and height
How to design it
01
Open the dieline
The studio loads it at the size above. Change the length, width or height if your product needs a different fit.
02
Add your artwork
Drop photos, logos and text onto the panels, fill panels with colour, or describe your product and let Printly AI draft a design you can edit.
03
Check it in 3D
The box folds up next to the editor, so you can see which panel is the front, what lands on the lid and how artwork wraps round each fold.
04
Download the print file
You get a ZIP with an SVG for the outside and one for the inside, your original images and a README for the printer.
Before you send it to print
Run background colours and photos out to the bleed line (grey, dashed), not only to the cut line, so no white edge shows after cutting.
Keep text and logos a few millimetres inside the cut and away from the red crease lines. The studio warns you when something sits too close.
Questions about this template
What size is the flip top boxes with window?
200.6 × 100.6 × 40.6 mm, measured as length × width × height. That is 7.9 × 4 × 1.6 in.
Can I change the size?
Yes. Type a new length, width or height in the studio and the dieline is redrawn for it. Glue tabs and flap depths keep their size, and the print file notes that the size was changed from the template's.
What file do I get?
A ZIP with one SVG for the outside of the sheet and one for the inside. Your artwork and text sit on separate layers with the cut, crease and bleed lines on top, and the original images come in an assets folder.
Use photos that reach about 300 DPI at the size they print. The studio flags any picture that will print soft.
Ask your printer for a proof, and agree the board and finish with them before you approve the run.
Reading the dieline
A dieline is the flat plan of the box. Blue lines are cut, red dashed lines are creased and folded, and the grey dashed line outside the cut is the bleed your artwork runs to. The same lines go into your print file untouched, on layers of their own, so the printer can make the cutting die from them.
About window boxes
Window boxes have a die-cut opening that shows the product. Anything printed over the window area is cut away, so keep text and logos clear of it.
Yes. Switch the editor to the inside and design it the same way. It exports as its own file.
Will my printer be able to use it?
The SVG opens in Illustrator, Inkscape and Affinity Designer, text stays as real text and the dieline stays vector, so a printer can work with it directly. Check their file requirements before you order.
Use photos that reach about 300 DPI at the size they print. The studio flags any picture that will print soft.
Ask your printer for a proof, and agree the board and finish with them before you approve the run.
Reading the dieline
A dieline is the flat plan of the box. Blue lines are cut, red dashed lines are creased and folded, and the grey dashed line outside the cut is the bleed your artwork runs to. The same lines go into your print file untouched, on layers of their own, so the printer can make the cutting die from them.
About window boxes
Window boxes have a die-cut opening that shows the product. Anything printed over the window area is cut away, so keep text and logos clear of it.
Yes. Switch the editor to the inside and design it the same way. It exports as its own file.
Will my printer be able to use it?
The SVG opens in Illustrator, Inkscape and Affinity Designer, text stays as real text and the dieline stays vector, so a printer can work with it directly. Check their file requirements before you order.
